QMODP0A Standard Q-Switch 20W
Description
These drivers based on quartz oscillators, produce a fixed stable and accurate RF frequency signal. The built in amplifier delivers the necessary RF power to drive an air cooled Q-switch up to 20 W.
The RF output power can be externally modulated with a TTL and an analog 0-5V signal. Standard output power is up to 20W, but can be reduced on request. Standard power supply is 24VDC.
Datasheet (QMODP0Axx-d024)Additional information
| Carrier frequency (MHz) | 27.12, 40.68, 68, 80, 110, Associated to AO device, Custom |
|---|---|
| FAC (Full Analog Control) | No, Yes |
| Frequency Stability (ppm/°C) | +/- 1 |
| Frequency Accuracy (ppm) | < 50 |
| Output RF power (dBm) | max 20 |
| Power Supply OEM version (24 VDC) | OFF=0.5A / ON =1.3A @110MHz, OFF=0.5A / ON =1.5A @80MHz, OFF=0.5A / ON =1.7A @40MHz |
| Digital Control (Pin 3) | TTL / 1 kΩ Pull down (DPC 1 = RF ON) |
| Rise Time/Fall time (ns) | 20 (<30) @110MHz, 25 (<35) @80MHz, 35 (<50) @40MHz |
| Output Impedance | 50 |
| VSWR | < 1.5/1 |
| Extinction Ratio (dB) | > 45 |
| Input Connector | DB9 |
| Output Connector | SMAf |
| Size / Weight | 129 x 61 x 30 mm3 / 340 g |
| Heat Exchange | Conduction through baseplate for OEM version |
| Operating Temperature | 10 to 40 (max Tcase 55°C) |
| Storage Temperature | -40 to +85 |