QMODP1 Standard Q-Switch 70W
Description
These drivers based on quartz oscillators, produce a fixed stable and accurate RF frequency signal. The built in amplifier delivers the necessary RF power to drive an air cooled or water cooled Q-switch up to 70 W. The RF output power can be externally modulated with a TTL and analog 0-5 V signal. 3 output power versions are proposed in order to optimize heat dissipation.
Datasheet (QMODP1Axx-d024)Additional information
| Carrier frequency (MHz) | 27.12, 40.68, 68, 80, Associated to AO device, Custom |
|---|---|
| Max RF power(W) | 20, 40, 70, Associated to AO device, Custom |
| Frequency Stability (ppm/°C) | +/- 1 |
| Frequency Accuracy (ppm) | < 50 |
| Output RF power (dBm) | ≥20, ≥40, ≥70 |
| Power Supply OEM version (24 VDC) | < 6.5 A, <3.5 A |
| Digital Control (Pin 3) | TTL / 1 kΩ Pull down (DPC 1 = RF ON) |
| Analog Control (Pin 9) | 0-5 V / 10 kW, 5V= RF HIGH LEVEL Control (FAC) |
| Rise Time/Fall time (ns) | 30 (<50) |
| Class | AB |
| Output Impedance | 50 |
| VSWR | < 1.5/1 |
| Extinction Ratio (dB) | > 45 |
| Forwarded Power Measurement (Pin 6) | Analog signal / (Load 1 KΩ) |
| Returned Power Measurement | Analog signal / (Load 1 KΩ) |
| Thermal Alarm Q-Switch (Pin 5) | TTL Signal |
| Thermal Security Driver | Automatic switch off for Tcase>70°C |
| Thermal Security Q-Switch | SMC (protection against overheating, for versions ≥40W) |
| Input / Output connectors | BNC, DB15, SMC |
| Size / Weight | 148 x 114 x 27 mm3 / 635 g |
| Heat Exchange | Conduction through baseplate for OEM version |
| Operating Temperature | 10 to 40 (max Tcase 55°C) |
| Storage Temperature | -40 to +85 |